Next, tell the router to generate the configuration files for phones that associate with the CME using the create cnf-files command.įinally, configure the source address for SCCP using the ip source address address port port command.
R1(config-telephony)#system message CISCO VOIP Step 2: Configure Router Telephony ServiceĬonfigure the maximum number of phones to be 2 using the max-ephones number command.Ĭonfigure the maximum number of directory numbers to be 10 using max-dn number.Ĭonfigure the phone keepalive timeout period to be 15 seconds by issuing the keepalive seconds command.Ĭonfigure a system message using the system message line command.
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/12 ms Sending 5, 100-byte ICMP Echos to 172.16.10.60, timeout is 2 seconds: Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/4 ms Sending 5, 100-byte ICMP Echos to 172.16.10.50, timeout is 2 seconds: ‧ Install Cisco IP Communicator (CIPC) on a host ‧ Configure Cisco Unified Call Manager Express (CME) Image = /opt/dynamips/images/c3725-ad.bin Workingdir = /opt/dynamips/dynagen-0.11.0/UTS/CCNP4/workingconfig # For Lab 2.1 Configure CME using the CLI and Cisco IP Communicator # CCNP Version 5.0: Optimizing Converged Cisco Networks
